Installing a Brick Paver Walkway or Lead Bricks

The usage of Installing a Brick Paver Walkway or Blue Bricks or Pavers to develop a sidewalk or outdoor patio matches a house in a manner in which is unmatched. It includes a level of quality and elegance to a house entryway that can not be achieved with either concrete or asphalt. Brick and Pavers likewise come in various colors and shapes permitting distinct color pattern and patterns to be achieved. In addition, installing a Brick or Paver walkway does not necessarily require a pro. With some basic understanding and a reasonably simple sidewalk strategy, a house owner is capable of carrying out such a job.

The secret to setting up a Brick or Paver Walkway is to first correctly prepare the area where the bricks/pavers are to be set up. The area ought to be dug out a minimum of a foot down, removing all topsoil and clay soil. In addition, string lines ought to be strung on each side of the pathway. The string lines indicate the ended up height of the sidewalk.
Once the location has been dug, 3/4" gravel stone ought to be laid in and tamped down tightly. Then 2" of sand, or stone dust ought to be topped the gravel. Once again the sand/stone dust need to be tamped down. Stone dust is preferred. The height between the tamped down sand and the stringline need to equate to the thickness of the brick or paver.

Now that you have a steady base, place a 1" pipe or ledger board the length of the pathway on either side of the pathway. Using a flatedge, e.g. a 2"x4" board, slide it over the two lengths white bricks of the pipe/ledger board. In doing this you will create a level surface area to lay the bricks/pavers.

Now location on the level sand/stone dust strips of plastic brick borders. Set up a run on both sides of the prepared area. These strips will act as your walkway border and assistance to keep the integrity and shape of the walkway.

The secret to laying the bricks/pavers is to ensure that they interlock with each other. Always stagger adjacent rows of bricks by 1/2 of more info a brick to interlock them. This will once again help preserve the integrity of the pathway.

Inevitably bricks/pavers will require to be cut or divided when developing the walkway. To actually cut/split the brick/paver, lay it in a bed of sand and location the sculpt at a 75 degree angle over the area where you want to break the brick. If your walkway has curves you will require click here to buy/rent a wetsaw.

After installing the bricks, develop the outside edges with extra sand, and after that shovel in the topsoil and load down securely.
Spread stone dust over the new pathway and sweep into the cracks. This will finish the interlocking of the bricks and assist to eliminate any weed development.


In addition, setting up a Brick or Paver pathway does not necessarily need a pro. The key to installing a Brick or Paver Walkway is to very first correctly prepare the location where the bricks/pavers are to be set up. Now that you have a stable base, position a 1" pipeline or ledger board the length of the sidewalk on either side of the walkway. These strips will act as your walkway border and help to preserve the stability and shape of the pathway. Undoubtedly bricks/pavers will need to be cut or split when developing the pathway.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

Comments on “Installing a Brick Paver Walkway or Lead Bricks”

Leave a Reply

Gravatar